Top best answers to the question «Should garage door torsion springs be lubricated»
What is the best lubricant for garage door springs?
- The best garage door lubricant. Silicone based lubricant is especially good for lubricating practically any part of your garage door. It has the ability to adhere well to both metal and plastic and won’t swell or soften any rubber parts, which is important for bushings or quiet nylon rollers.
9 other answers
Garage door springs should be coated about once every season. Allow the oil to drip down and coat the cables on the sides of the garage door. While lubricating, you should also check the garage door hardware parts. With repeated use, the hardware on the garage door wil tend to loosen over time.
When performing maintenance we start with the rollers, spraying each roller with a quality garage door lubricant. We also spray each hinge with the same garage door lubricant. we work our way up to the end and center bearing plates, spring bar/torsion tube, and finally to the spring (s).
The springs on the garage door should be sprayed down with a lubricant but avoid overdoing it so there is no excess lubricant that drips out. Up next to be lubricated are the steel hinges at their pivot positions. Again, only do this for the steel ones and not for hinges made of plastic. Lubricating plastic can make the hinges break down easily.
Both extension and torsion spring systems need to be lubricated on a regular basis. Lubrication helps reduce the friction within the steel coils. Once done, your garage door will operate much more quietly. Simply apply a little oil on the spring, starting at the top.
We recommend lubricating springs, hinges and rollers every three months. The track should be lubricated about once a year. Continue reading to learn a little bit more about lubricating your garage door.
What You Should Know About Lube for Garage Doors. The life of garage door springs can be maximized by properly and regularly lubricating the springs. Metal springs are susceptible to corrosion which causes friction and quickly wears down the springs. The right lubricant can reduce and combat rust and corrosion.
The springs can usually be found at the top of the garage door and must be fully lubricated as well. The bearing plates are the moving circular parts on both sides of the springs. Spray down the outside of the springs and near the center of the bearing plates, then open and close your garage door to spread the grease around. 
Torsion springs are mounted above your garage door. Lubricating these springs will help reduce friction and noise as the coils rotate when the door opens and closes. There is a metal bearing or plastic bushing inside the torsion spring mounting cone on one end that needs lubrication as well.
You don’t need to lubricate the tracks, but ensuring they’re clean is essential to your door’s functioning. Springs. Spray down the garage torsion springs that lift your garage door day in and day out. Again, you want to only lubricate them enough that they move better, without a lot of extra lubricant dripping out.