Why won't my garage door close without holding the button?

10
Charity Stanton asked a question: Why won't my garage door close without holding the button?
Asked By: Charity Stanton
Date created: Sat, Aug 7, 2021 3:15 AM
Date updated: Tue, Jun 21, 2022 5:07 AM

Content

Top best answers to the question «Why won't my garage door close without holding the button»

If you encounter difficult spots, you likely have a bent track, a broken wheel, or a severe lack of track lubricant. Call a professional. If the door opens with the opener fine, but reverses almost immediately when you try to close it, then you likely have a problem with your sensor alignment.

9 other answers

Step-by-step procedures to try if the Garage Door of your home will not go down without holding the button before calling a repair manWas this video helpful?...

If you are struggling to close your garage door without holding down the button, this could be a sensor blockage issue. The sensor will not activate the garage door to close if there is anything in its way. The blockage may not be noticeable, so check for debris, spider webs, or small rocks in the sensor’s way.

Garage door will not close without holding down the wall button. Only the wall button will close it. Neither wireless remotes work. I have disconnected the safety devises and still have the same issue.

If the remotes will still open the door but it will only close if you hold the button down on the wall control continuously then you likely have an issue with the safety sensors. There is a safety sensor mounted near the floor on either side of the door, these sensors have electronic "eyes" that have to "see" each other or the door control stops the garage door from closing.

Woman uses makeup mirror to help fix garage door. Garage door won't close using the remote but closes if you hold down the button on the wall.

After a little frustrating experimentation, you discover that the door will only completely close when you hold down the button on the wall switch. While you might look to your remote as the issue, this very specific issue is a problem with the garage door itself, or more specifically, the safety sensors at the bottom.

Willow Creek Overhead Door owner, Tony Hall shows you some simple steps to trouble shoot why your residential garage door or commercial overhead door will no...

If your garage door won’t close all the way, the problem could be due to a blocked photo-eye. The majority of garage doors manufactured since the early-1990s are equipped with this safety feature. The photo-eye components consist of two pieces that align face-to-face across each side of the garage door, roughly four feet above the ground.

Here are the 4 reasons why you are having issues with your garage door not closing all the way. We create the 4 most common problems as well as show you the ...

Your Answer